Carton reciprocating elevator


Product Description

Carton reciprocating elevator:

The working principle of the reciprocating elevator is that the driving device drives the chain through the sprocket, and the two ends of the chain are respectively connected with the loading table and the counterweight component, and the positive and negative rotation of the motor can realize the lifting and lowering of the loading table.

One. main mechanical structure and features:

Body: cold rolled steel plate.

Outer sealing frame: wire mesh sealing frame is adopted.

Loading platform: after cold rolling of steel plate, it is welded into a whole.

Loading conveyor: multi - chock roller table machine, structure as mentioned above.

Surface coating: steel wire brush and sandpaper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 90 m. Spraying color shall be specified by party a's color card.

Product Description

Two. Main performance and parameters:


Four column frame type

Use weight block inside

Guide rails with elevator requirements

Four 16A-1 lifting chain

Drive unit at the top

Mesh cover around

Roller conveyor/chain conveyor inside

Broken chain protection device




Length of inside conveyor L (mm)

L= pallet length + 200

Height  (mm)

Min height of conveyor connecting to lifter is 500mm

Min. top height of lifter = conveyor height + Pallet height + 1500

Width of lifter W (mm)

W=pallet width +950( inside chain conveyor)

W=pallet width +1030(inside roller conveyor)

Motor power P (kw)


Transfer:0.75~1.5(chain conveyor)

               0.37~0.75(roller conveyor)

Lift speed V (m/min)

Max 60

Unit payload(Kg)

Max 1500Kg