Previously, YUPACK has already introduced 3 small categories of reasons that may cause pallet piercing sword strapping machine fencing offset, today YUPACK will continue to share other reasons that may cause pallet piercing sword strapping machine fencing offset:
(B) improperly set equipment parameters
1, tension adjustment imbalance: the tension of the strapping band has a significant impact on the operation of the sword belt. Tension is too large, the sword belt in the running process by the lateral tension increases, easy to deviate from the track; tension is too small, the strapping belt can not be tightly wrapped around the goods, and in the process of feeding the belt is prone to slack, jitter, interfere with the normal operation of the sword belt, resulting in running off.
2, speed matching problem: feeding motor and sword belt drive motor speed if not matched, will make the sword belt in the feeding and recovery process rhythm disorder. For example, if the speed of the belt is too fast, the sword belt will not be able to adjust the position in time, and it will run off; if the recovery speed is too slow, it will cause the sword belt to pile up, which will also trigger the phenomenon of running off.
(C) the interference of external environmental factors
1, the workplace vibration: If the pallet strapping machine is installed in the vibration of the workplace, such as near the large machinery and equipment, transportation channels, etc., the equipment will continue to be affected by external vibration in the operation process. This vibration will make the running trajectory of the sword belt a small offset, after a long time accumulation, the problem of running gradually intensified.
2, dust pollution: in some dusty working environment, such as cement factories, flour mills, etc., dust is easy to adhere to the sword belt, track and the surface of the drive components. The accumulation of dust will change the friction between the parts, affecting the smooth running of the sword belt, and at the same time, it may lead to rust, wear and tear of the parts, and ultimately trigger the sword belt to run off.
In summary, the pallet through the sword strapping machine sword path offset problem is caused by many factors, users need to analyze and solve different problems, do not blindly follow.