Qingdao Ausense Packing Equipment Co.,Ltd

In the previous article, YUPACK Carton Sealing has shared the reasons for the clogging of the nozzles of hot melt adhesive machines. One of the reasons is the carbonization of the hot melt adhesive. There must be users who will wonder how exactly to avoid the carbonization of the hot melt adhesive. Today, YUPCAK will share with you how to avoid the carbonization of the hot melt adhesive.

Any equipment may encounter malfunctions during its operation, and the case sealing machine is no exception. However, the key lies in how to solve the problems efficiently. Below, based on previous work experience, YUPACK will share with you the troubleshooting steps for the case sealing machine. These steps can help you quickly identify and eliminate problems, thus improving production efficiency.

In automated packaging equipment, hot melt adhesive machines are frequently used. For example, hot melt adhesive case opening machines, hot melt adhesive case sealing machines, one-piece wrapping machines, or automatic carton folding machines, etc., all require the use of hot melt adhesive machines. Currently, most of the hot melt adhesive machines equipped by YUPACK are mainly imported brands. However, whether they are imported or domestically produced, the blockage of the nozzles of hot melt adhesive machines occurs quite often. Customers often question whether there is a problem with the equipment, but this is not the case. Today, YUPACK will share with you the reasons for the blockage of the nozzles of hot melt adhesive machines and the solutions, hoping to be helpful for your future use.

The stretch film is a consumable material required for the wrapping machine. After each roll of stretch film is used up, it needs to be manually replaced. Many users who use the wrapping machine for the first time are not very familiar with the replacement of the film roll. Today, YUPACK will share with you the method of replacing the film roll of the wrapping machine:

The side sticker of the carton sealer, also known as the folded edge of the carton sealer, refers to the edge of the adhesive tape that is folded over after the carton sealer seals the middle seam of the carton. Many users believe that the longer the folded edge is, the more secure the carton sealing effect will be. Some other users, due to the presence of information such as labels on the side of the carton, are concerned that the adhesive tape will cover these labels, so they need to set the side sticker of the carton sealer to be shorter. No matter what the requirement is, in short, it is necessary to adjust the side sticker of the carton sealer. Below, YUPACK will share with you the method of adjusting the side sticker of the carton sealer.

The external vacuum packaging machine is a kind of packaging equipment that comes into direct contact with the products. When this machine is in use, the air suction nozzle will directly extend into the packaging bag. If the packaged items contain powder or liquid, it is highly likely to cause damage to the vacuum pump. Therefore, timely and effective maintenance work is of great significance for the operation of the equipment. Now, YUPACK will share with you the maintenance and upkeep of the external vacuum packaging machine: