1. PLC control can calculate winding time according to product size and stop. , The belt needs to be broken manually, and the swivel needs to be reset manually.
2. Button-type operation, simple and convenient to use tapered positioning roller device, so that the swivel can pass through the center of the package correctly.
3. The roller is covered with rubber, the motor drives the roller to run, and the roller drives the goods to automatically complete the overall packaging
4. A pressing roller device is set between the supporting rollers, which is mainly used for the clamping function of the product. A pressing device is installed at the back of the equipment, which can be controlled manually.
(Note: Air source is required)
5. The idler roller adopts the coordination function of the driving roller and the driven roller to increase the stability of the goods in the packaging process
6. The packaging ring body adopts frequency conversion speed regulation, and the overlap degree of the winding belt can be adjusted according to the packaging requirements.
7. The pneumatic inner support type tightening method is adopted to ensure that the swivel is in the center of the cargo during the rotation of the cargo.
Sino-French joint venture
(Support for customization)
Ring Outside Diameter
Ring Inner Diameter
Width: 100mm Thickness: 20-30μm
Inner Hole D:76.2mm Outer D: 200mm
Max Coil Weight
Rotating ring inner diameter
Rotating ring outer diameter
220/380V 3ph 50HZ/60HZ