Pallet pop-up table:
One. main structure and features:
Jacking mechanism: welding type bottom frame with height adjusting foot, base type deceleration motor is placed in the middle of the bottom frame, two shafts are connected by bearing pedestal and bottom frame on both sides respectively, two shafts are connected with the motor by driving chain respectively. Each shaft and both ends are equipped with needle roller bearing crank arm to form the jacking structure.
Bottom bracket: M20 screw adjusting pin is fixed to the ground (two mounting holes for anchor bolts).
Accessory device: photoelectric support (lift two positions, in place detection).
Purchased parts configuration: reducer motor SEW, chain for hangzhou donghua, bearing with seat TR, ha shaft for bearing.
Surface coating: steel wire brush, sand paper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 80 m.
Two. Main performance and parameters:
| Description Welded bottom frame R series built-in motor CAM lifting, travel Max.200mm Intermediate device type |
Type | |
Standard | Standard |
Body length L（mm） | L = matching chain machine center distance B - 100 |
Height (mm) | H(min) ≥580(with chain machine H=600) |
Center distance B of jacking arm B (mm) | 350 ≤ B ≤ 2000； |
Motor power P (kw) | Lifting :1.5 ~ 3 |
Lifting time (S) | five(single stroke) |
Standard load (Kg) | Max ≤1000Kg |
Maximum load (Kg) | Max ≤1500Kg |
