What do you need to pay attention on belt feeding with strapping machine

09 Jun.2023

Belt install with strapping machine is the first task to prepare for the balers. In the previous article, Yupack has described how to install belt inserting. There are also tutorials on belt inserting in the small video on the website. You can refer to it at any time. What Yupack wants to share with you today is also related to belt inserting, mainly talking about what needs attention in belt inserting.

1. The belt disc should be fixed tightly. Before inserting, fix the packing tape rolls to the packing tape inserts. After fixing, there is a swivel handle on the inserting tape inserts. The swivel handle must be screwed to a stable position. Otherwise, the packing tapes may fall into the gaps in the packing tape inserts. Normal operation is affected.

2, the door of the storage box should be locked. When performing belt install work, it is necessary to open the door of the storage box, but when the belt install is completed, the operator often forgets to close the door and the strap belt can rush out of the storage box when the machine performs the storage work.

3, pay attention to the cutting position of the strap belt do not bend. This is often ignored by many users. When the strap belt is sent in place, it will sometimes bend at the cutting tool, thus affecting the normal use of the strapping machine.

The above is what need to pay attention to Yupack's belt install summarized for you in your work. I hope it will be helpful for you to use the baler in the future. Welcome to continue to pay attention to the official website of Iaxun: